This post may contain affiliate links.

10 Best Snowshoes for Winter Hiking in 2023-2024

10 best snowshoes for winter hiking

For winter snowshoeing on hiking trails and in the backcountry, you want a winter hiking snowshoe that is durable, with aggressive crampons for traction and a secure binding system that locks your boots to the snowshoes. If you’re interested in getting off the grid and snowshoeing through backcountry terrain, these are the 10 best snowshoes we recommend. For more information, see our buying advice below.

Make / ModelHeel BarBinding
MSR Lightning AscentYesMesh Net
MSR Evo AscentYesTriFit Straps
Tubbs Flex VRTYesBoa
Tubbs Flex ALPYesRatchet Strap
TSL Symbioz EliteYesRatchet Strap
Tubbs MountaineersYesRatchet Strap
Atlas Range BCYesWebbing Strap
MSR Revo Explore YesRatchet Strap
Northern Lites BackcountryNoSki Straps
Crescent Moon Backcountry 32YesWebbing Strap

1. MSR Lightning Ascent Snowshoes

MSR Lightning Ascent Paragon Binding

The MSR Lightning Ascents revolutionized snowshoeing when they were first introduced and MSR has continued to refine them since. They feature a unique 360 degree toothed crampon that’s built into the frame for traction when you’re walking uphill, downhill, or side-hilling across a slope. A flip-up heel bar makes it easier to climb hills, while the mesh-net Paragon binding lays flat, and makes them easy to pack or strap to a backpack.  A women’s model is available.  Read the SectionHiker Review. 

Shop at REIShop at MSR

2. MSR Evo Ascent Snowshoes

MSR Evo Ascent Snowshoes

MSR’s Evo Ascent Snowshoes are made with a hard plastic frame instead of the flexible decking used by many snowshoes. This makes them extra tough and durable and a favorite with Search and Rescue groups because they’re virtually indestructible. They use a strap-based, lay-flat binding that makes them easy to strap to the outside of a backpack and won’t freeze up. There are two long crampon rails along the sides of the Evo Ascent that provide excellent traction, in addition to a steel crampon under your foot, and rear braking bars. A heel bar is also included for hill climbing. Unisex. Read our Evo Ascent Review.

Shop at REIShop at MSR

3. Tubbs Flex VRT Snowshoes

Tubbs Flex VRT
The Tubbs Flex VRT is an aggressive backcountry snowshoe designed for mountainous terrain. It has a boa binding and a heel strap that make it easy to adjust and secure to wear. It has carbon steel toe crampons that maximize traction while curved, toothed side rails provide enhanced grip when side-hilling on sloped terrain. A 19° heel lift makes these snowshoes mountain-climbing machines. A women’s Flex VRT is also available.

Shop at REIShop at Amazon

4. Tubbs Flex ALP Snowshoes

Tubbs Flex Alp

The Tubbs Flex ALP has a simplified binding that is easy to use, comfortable, and compatible with all styles of boots. The Flex Alp has carbon steel toe crampons that maximize traction while long, toothed side rails (similar to the MSR Evo Ascent) provide enhanced grip on hard snow and icy conditions. The plastic decking provides good flotation and has some flex to it which helps with balance when hiking across mixed surfaces and side-hilling. A heel bar is included. The main difference between the Tubbs Flex Alp and the Tubbs Flex VRT is that the VRT has a boa binding and the Alp doesn’t. A women’s Flex ALP is also available.

Shop at BackcountryShop at Amazon

5. TSL Symbioz Elite Snowshoes

TSL Symbioz Elite Snowshoes

The TSL Symbioz Elite is a favorite with mountain hikers because it has a flexible plastic footbed that adapts to varied terrain and a comfortable ratchet-style binding that remembers your boot size for easy on and off. They have a large horizontal front crampon, good for digging into slopes, with eight very aggressive stainless-steel cleats, diagonally oriented down the sides to prevent side slipping. This snowshoe is best for climbing steep and icy terrain. A heel bar is included. Unisex. Read our Symbioz Elite Review. 

View at REI

6. Tubbs Mountaineer Snowshoes

Tubbs Mountaineer Snowshoes have a teardrop design that provides excellent flotation, along with an aggressive front crampon, and specially designed heel crampons that are angled to help with braking down steep slopes.  They have a ratchet-strap controlled step-in binding system w/ a rear heel strap to hold your boots in place. The Mountaineers are also available in a very large 36″ size, suitable for larger individuals, or if you need to carry heavy loads and need more floatation in deep powder. A heel bar is included. A women’s model is available. 

Shop at REIShop at Backcountry

7. Atlas Range BC Snowshoes

Atlas Range-BC Snowshoes
The Atlas Range-BC snowshoe is a backcountry snowshoe with aggressive toe crampons and a serrated toothed frame for traction when side-hilling. It has a simple lay-flat binding which makes it very easy to strap to the sides of a backpack and can accommodate larger mountaineering and snowboard boots. The snowshoes include19-degree heel lifts that are designed to reduce calf fatigue and tendon strain on those steep mountain ascents. A women’s model is also available.

View at REI

8. MSR Revo Explore Snowshoes

MSR Revo Explore Snowshoes
The MSR Revo Explore Snowshoe has a ratchet-strap style binding system that makes them easy to use with all types of footwear (contact MSR for longer replacement front straps to accommodate very large boots). They have an aggressive toe crampon, a toothed crossbar member, and a serrated frame that provides excellent traction on snow and ice. Plastic decking keeps them lightweight, while a heel bar is also included to reduce calf fatigue when climbing slopes. A women’s model is available. Read our Revo Explore Review.

Shop at REIShop at MSR

9. Northern Lites UL Backcountry Snowshoes

Northern Lites Backcountry Snowshoes
Northern Lites Backcountry Snowshoes are 30″ ultralight snowshoes that only weigh 43 oz per pair. They’re lighter weight and less fatiguing to carry because they’re made with lighter weight aluminum framing, they have aluminum crampons, and plastic decking. They have simple bindings with three plastic straps and one heel strap that are compatible with all types of footwear. The Backcountry model is optimized for use in deep powder for users up to 250lbs in weight, including gear. However, we don’t recommend them for climbing mountains because they don’t have a heel bar. Read our Northern Lites Gear Review. Unisex.

View at Garage Grown

10. Crescent Moon Big Sky 32 Snowshoes

Crescent Moon Gold 10 Snowshoe
Crescent Moon’s Backcountry Snowshoes have a high flotation teardrop design. Loaded with traction, these snowshoes have four crampons under the toe, forefoot, and heel, as well as side crampons for traversing sloped terrain. They have a step-in binding system tightened on top with a single strap w/ a ratchet-style rear strap to lock your boot in place. Sizing runs large, fitting men’s boot sizes 10-15, including large-volume boots like snowboard or hardshell tele boots.

View at Amazon

How to Buy Winter Snowshoes

Winter hiking snowshoes serve two key functions: they provide traction on icy trails and when climbing steep terrain, and they provide flotation over snow, so you don’t sink or posthole, which can be quite exhausting. While all of the winter hiking snowshoes listed above satisfy both of these requirements, some excel in the traction department, like the MSR Lightning Ascents, MSR Evo Ascents, Tubbs Flex VRTs, and TSL Symbioz Elites, while others emphasize flotation, like the Tubbs Mountaineers and the Northern Lites.

As a rule of thumb, tear-drop shaped snowshoes with synthetic riveted decks tend to emphasize flotation, while rectangular-shaped snowshoes are more traction-focused. If you’re going to be climbing ice-covered mountains predominantly, you’ll probably want a snowshoe that emphasizes traction, while snowshoes that focus on flotation, will be a better fit for areas where deep, powdery snow is the norm.

Snowshoes are bulky and can be difficult to pack
Snowshoes are bulky and can be difficult to pack

If you’re trying to choose between different snowshoes, there are four key properties that should guide your decision-making:

  1. Packability
  2. Weight
  3. Bindings
  4. Sizing

Packability

Most winter hikers carry multiple traction devices and switch between them during the day. If you’re hiking a packed trail, you might start out in bare boots, relying on your boot treads for traction because the less weight you have on your feet, the slower you’ll fatigue. If you encounter slick or icy terrain you might switch to microspikes, and then snowshoes, if you encounter fresh snow that hasn’t been packed down or is mixed up with slush.

In order to have these traction aids when you need them, you need to carry them. While microspikes are pretty easy to pack, snowshoes aren’t because they’re big and bulky. The bulk comes from their length, width, and thickness, which is primarily a function of the style of binding they use. Lay flat bindings like the simple straps on the MSR Lightning Ascent and the MSR Evo Ascent are the easiest snowshoes to attach or carry in a backpack, while snowshoes with Boa binding systems tend to be the bulkiest and most difficult to pack.

Weight

Weight is also a key factor when choosing which snowshoe to buy. Most snowshoes weigh four to five pounds, and they’re probably going to be the heaviest thing in your backpack, after water. That weight adds up during the course of a day, regardless of whether it’s in your backpack or on your feet.

Bindings

We’ve already considered the packability of snowshoe bindings, but there are other factors you should consider when making a selection, such as comfort, security, ease of use while wearing gloves, whether the binding can freeze and become inoperative, and how easy it is to repair if it does break. For example, some people worry that Boa closure systems can freeze up if they get wet and will cease to operate until they can be defrosted. It’s a valid concern. One of their advantages, however, is that they are easy to use while wearing gloves and provide a secure grip that’s unlikely to come undone once set. Contrast that to the flat straps used on MSR snowshoes. They’ll never freeze up, they’re easy to replace if torn or lost, but they can be hard to attach when wearing gloves, and they tend to pop open once or twice during a hike.

Sizing

Snowshoes come in a wide variety of sizes. These are determined by the total weight you want to carry (bodyweight + pack weight) and the amount of flotation you require. Men’s sizes are usually larger than women’s sizes, because men are taller and heavier, while women’s snowshoes tend to be narrower than men’s because their gait isn’t as wide.

If you’re buying a snowshoe that’s more traction oriented, you can sometimes drop a size below the manufacturer’s recommended sizing, especially if you’re hiking in an area that doesn’t get a lot of snow or you’re hiking on trails that have been broken out by other hikers. Sizing is directly correlated to gear weight and this is a tactic you can use to lighten your load. If flotation is a priority, you can sometimes buy tails, which are add-on snowshoe extensions that make them longer and increase their surface area. This is another way to cut down on the weight of a snowshoe because you can bring your tails when you need more flotation, but carry a lighter weight snowshoe in less challenging conditions.

SectionHiker is reader-supported. We only make money if you purchase a product through our affiliate links. Help us continue to test and write unsponsored and independent gear reviews, beginner FAQs, and free hiking guides.

3 comments

  1. The women’s Lightning Ascents are perfect for Vermont’s mountains. I have used them on easy day hikes, the higher peaks, Long Trail treks, and winter camping. They are good both on- and off-trail. Light enough to carry and to walk in, and super grippy on the snow. Highly recommend.

  2. Do any of these NOT get the icy buildup on the heel area, which makes every snowshoe I’ve ever tried unusable after twenty minutes?

    • The icy buildup is called snowballing. It’s a function of the moisture in the snow and not a defect in snowshoe design. The bets way to get rid of it to to whack the back of your snowshoes with your trekking poles periodically and to avoid stepping in any liquid moisture, which aggravates the snowballing. It happens the least on snowshoes that have long crampons running along the wide of the decking like the MSR Evo Ascent.

Leave a Reply

Your email address will not be published. Required fields are marked *

Solve *