This post may contain affiliate links.

ZPacks.com Arc Blast Ultralight Backpack Review

Zpacks.com Arc Blast Ultralight Cuben Fiber Backpack
ZPacks.com Arc Blast Ultralight Cuben Fiber Backpack

The ZPacks.com Arc Blast Backpack is an ultralight Dyneema DCF backpack with an external carbon fiber frame that is available in three sizes: 45L, 52L, and 60L. Weighing just 17.4 ounces in the 60L version (shown here in orange), the Arc Blast is rated for 30-pound loads making it ideal backpack for thru-hikers and lightweight backpacking trips with up to a week’s worth of food.

Zpacks has an updated version of this product available called the Zpacks Blast 55L (click for details). This review is for an older version of the same pack.

Dyneema Composite Fabrics

If you’re not familiar with Dyneema (DCF, formerly called cuben fiber) here’s a fast primer. DCF is an ultralight material used by several ultralight backpacking manufacturers that is lighter weight and more rip-resistant than conventional tent and backpack fabrics. For example, if a 2 pound tent or backpack made using Robic or Dyneema reinforced nylon grid weighs 2 pounds, it will weigh approximately half that or 1 pound when made with DCF.

The ZPacks.com Arc Blast Backpack is made using a hybrid cuben fiber and polyester fabric that gives it even more strength, prevents fraying, and canbe dyed in different colors.
The ZPacks.com Arc Blast Backpack is made using a DCF material that gives it even more strength, prevents fraying, and can be dyed in different colors.

More technically, DCF is a non-woven, laminate fabric made using ultra-high-weight-molecular polyethylene and polyester that produces an exceptionally strong and waterproof material. It’s also considerably more expensive because production is controlled by one company that makes it in small batches and because gear manufacturers have had to evolve manual fabrication and styling processes (gluing and taping as opposed to sewing) to create products using it. That price is unlikely to go down because DCF products are too expensive to produce in large quantities.

The Arc Blast backpack reviewed here is constructed from 2.92 oz/sq yd DCF fabric. This material is Dyneema on the inside with a protective layer of 50 denier polyester on the outside. The outer layer gives it even more strength, prevents fraying, and makes it possible to dye in different colors.

ZPacks.com has been making DCF and tents for over ten years and has built the highest volume manufacturing capacity (all USA-based) for creating ultralight backpacking tents, backpacks, clothing, and accessories using the material.

Internal Storage and Organization

The ZPacks Arc Blast Ultralight Backpack is configured as an ultralight backpack with a front mesh pocket and two side water bottle pockets, so you can keep most of the gear and food you need to access during the day on the outside of the pack without having to open the main compartment.

The front mesh pocket is fairly small compared to other ultralight backpacks and does not stretch which can make it difficult to fit rigid objects such as a wood stove or cook pot into it. On the flip side, the mesh weave is fairly wide, making it easy to see the contents of the pocket, although I wouldn’t trust its durability for off-trail use.

The Arc Blast is configured as an ultralight backpack with a front mesh pocket and two side water bottle pockets
The Arc Blast is configured as an ultralight backpack with a front mesh pocket and two side water bottle pockets

The side bottle pockets are sized to hold 1-liter soda or Nalgene bottles, which are reachable when wearing the pack, and have drain holes sewn into the bottom. They’re a tight fit however, when the pack bag is full, making it difficult to add tent poles or other gear to the pocket when a water bottle is carried.

The top of the pack closes with a roll-top, dry-bag style closure that has a velcro strip to ensure the pack bag top is closed before you roll it shut. However, the end clips of the roll-top only close on top of the pack and not along the sides, which can be awkward and catch if you’re hiking through overhanging vegetation.

The inside of the pack bag is cavernous in the 60L size and can really hold a lot of gear or food. The interior is also fully seam taped to prevent water from leaking into the pack when it rains or the pack is set on wet ground. The only openings into the main pack bag are dual hydration ports (there’s a reservoir hang loop inside the pack), which are located between your shoulder blades at the top of the frame.

When packing the Arc Blast, I’d advise you to keep as much of your gear as loose as possible if you need to maximize your volume utilization to carry a lot of gear or food, rather than packing it in a lot of stuff sacks.  The DCF fabric used in the pack has very little “bend” in it and won’t wrap itself around bulges created by stuff sacks. If you must use stuff sacks, use ones that have drawstring tops that can vent excess air when stuffed. The pack bag on the Arc Blast is sufficiently seam-taped and water-resistant that you don’t need to use (so-called) waterproof stuff sacks when packing it.

Daisy chains sewn onto the front of the shoulder straps make it easy to attach accessory pockets.
Daisy chains sewn onto the front of the shoulder straps make it easy to attach accessory pockets.

External Attachment Points and Compression System

The Arc Blast provides an impressive array of options for attaching external gear to the outside of the pack. Many of these attachment points can also be used to add accessory pockets sold by the manufacturer, third party products such as external camera pockets, or trip-specific cordage solutions you whip up on the fly to carry bulky gear.

First off, the Arc Blast shoulder straps and hip belt have daisy chains sewn across them. They’re a little crude looking but it’s easy to add pockets using quick-attach tri-glide buckles or cord.

Thermarest Zlite foam sleeping pad strapped to bottom of Zpacks Arc Blast Backpack. Road walking along a stretch of the Bay Circuit Trail in Massachusetts.
Thermarest Z-lite foam sleeping pad strapped to bottom of Zpacks Arc Blast Backpack. Road walking along a stretch of the Bay Circuit Trail in Massachusetts.

The pack also comes with a fairly unique way of attaching a foam pad to the outside of the pack (shown above) that includes two cords attached at the base of the mesh pocket and the bottom of the pack and tightened using line loc adjusters. Despite marketing perceptions, most triple crown thru-hikers still carry foam pads because they’re far more durable than air mattresses, and this attachment point is a great place to carry a foam pad like this, out-of-the-way.

While the Arc Blast comes with a zig-zag style compression system, nothing prevents you from re-routing the cord(s) as needed.-1
While the Arc Blast comes with a zig-zag style compression system, nothing prevents you from re-routing the cord(s) as needed.

The Arc Blast has gear loops sewn to the sides of the pack and comes with a non-elastic cord arranged in a zig-zag pattern that can be used for compression or to secure gear to the side of the pack. In practice, I find that this strap geometry makes it difficult to secure or release bulky gear like snowshoes to/from a pack, but there’s nothing to prevent you from removing it or adding additional cord/cord locks to create a more “horizontal” compression/external attachment. You can also run cords over the front mesh pocket to secure other bulky items to the outside of the pack.

Backpack Frame and Suspension

The Arc Blast has a ventilated back panel and external carbon fiber frame that makes the pack feel stiff and enhances load transfer to the hips
The Arc Blast has a ventilated back panel and external carbon fiber frame that makes the pack feel stiff and enhances load transfer to the hips

The Arc Blast is an external frame backpack with a lightweight carbon fiber that frame serves several functions.

  • The frame helps keep the torso length and fit of the pack the same, no matter how much weight you carry in the pack. This makes the pack easier to use for transitional lightweight backpackers who are less familiar with the nuances of fitting and loading ultralight backpacks.
  • The frame suspends a ventilated back panel that makes the pack more comfortable to wear in warmer weather, in part because your shirt will dry faster when you sweat.
  • When adjusted, the external frame creates a curve that concentrates the load onto the back of your hips regardless of your waist size, allowing you to hike with a more upright and biomechanically efficient stance.

The effect of the curved external frame is further enhanced by the fact that the hip belt is sewn to the back of the pack, unlike backpacks where it’s less securely attached using velcro. A sewn attachment always trumps a floating one, providing a more continuous kinetic chain, so that pack moves when your hips move without any wasted or diffused energy.

When tightened, the frame forms an arc or curve that creates a space between your back and the back of the pack,while directing the load onto the back of your hips.
When tightened, the frame forms an arc or curve that creates a space between your back and the back of the pack, while directing the load onto the back of your hips.

To created the curvature, ZPacks recommends adjusting the frame so that the mesh panel is 2.5 inches off the back of the pack. This adjustment is made by pulling forcefully down on the line-loc cords that suspend the mesh panel. Unfortunately, these line-loc cords slipped repeatedly when I wore the Arc Blast, but this is easily remedied by tying a simple overhand knot in the cord so it can’t slip through the line-loc channel. If there’s an upside to the use of line-locs in many places on this pack, it’s that they make user customization and adjustments possible.

Unfortunately, the line loc tensioning system slips under load. This is easily remedied however by tying an overhand stopper knot in the line.
Unfortunately, the line loc tensioning system slips under load. This is easily remedied however by tying an overhand stopper knot in the line.

Customization Suggestions

Whenever I test backpacks that are available with custom or add-on options, I make a point to obtain the base pack from a manufacturer to see if the vanilla model is fully functional for its intended use. This proved to be the case with the Arc Blast base model.

If you can afford to customize the pack or add a few options to it (most don’t require any sewn modification and attach using cords), there are a few that I would recommend making the pack more convenient to use and bring it to complete parity with competitive products.

These include:

Adjustable torso w/ load lifter straps attached to frame ($8): Fit can be tricky with this pack because tensioning the external ventilated frame makes the pack noticeably shorter. Furthermore, ZPacks uses an unconventional heuristic of sizing backpacks based on an individual’s height rather than torso length, so that having an adjustable frame will ensure that you can dial in the fit of the pack to your exact physical measurements.  The adjustable frame also connects the load lifter straps to the frame instead of the pack bag, making them more effective.

Belt pouches ($41.95/pair):  Hip belt pockets eliminate the need to open your pack frequently if you carry a lot of little things like Aqua Mira Bottles, bug dope, lip balm, food bars, sunglasses, hair ties, etc. If you’ve ever owned a pack with them, you’ll understand.

Top side pockets ($35/pair): These are pockets that can be attached to the side of the pack, at about shoulder height. They’re indispensable for storing wet or smelly items like a wood-burning/solid fuel stove and cook pot , which you don’t want to put into the main compartment of the pack, and which may be too big to fit into the front mesh pocket.

Lumbar pad ($12): Helps improve load transfer of frame to your hips if you have a flat ass or square hips.

Backpacking in New Hampshire's White Mountains with the ZPacks Arc Blast Ultralight Backpack
Backpacking in New Hampshire’s White Mountains with the ZPacks Arc Blast Ultralight Backpack

Comparable Backpacks

Make / ModelWeight (oz)Type
Gossamer Gear Mariposa 6030.5Speed flap
Granite Gear Crown 3 - 60L36.7Roll top, Top lid
Granite Gear Blaze 6048Roll top, Top lid
Hyperlite Mountain Gear Southwest 5532Roll top
Osprey Exos 5843Top lid, speed flap
Gregory Focal 5841Top lid, speed flap
Zpacks Arc Blast 5521Roll top
Mountain Laurel Designs Exodus 5718Roll top
Mountainsmith Scream 5545Roll top
Seek Outside Gila 3500 (57L)47Roll top, side zipper
Sierra Designs Flex Capacitor41.2Top lid
Elemental Horizons Kalais37Roll top

Recommendation

The Zpacks Arc Blast Ultralight Backpack is optimally configured for multi-day backpacking trips and three-season thru-hikes with many innovative features including a ventilated external carbon fiber frame and seam-taped DCF construction. Weighing just 17.4 ounces in the 60L size, it’s a deceptively sophisticated backpack that works extremely well in its base configuration but can also be enhanced using add-on accessories sold by the manufacturer or third-parties. While not as polished looking as other ultralight backpacks made using more conventional fabrics, the Arc Blast 60L is a durably constructed, feature-rich, and easy to customize pack making it a very attractive option for backpackers who want to slash their gear weight without sacrificing on comfort or fit.

Likes:

  • Shoulder pads are free to rotate around different chest shapes
  • Side water bottle pockets are reachable while wearing the pack
  • Side water bottle pockets are solid panels with drain holes and more durable than mesh ones
  • Compression and external attachment system can be customized using gear loops located around the perimeter of pack
  • Pack add-ons can be added any time after purchase and be trip-specific
  • Pack is nearly waterproof with seam-taped seams (except for hydration ports)
  • Orange color is rad. I love it!

Dislikes:

  • Roll-top closure does not secure along sides of the pack, only on top
  • Front mesh pocket is not stretchable and quite limited in size
  • Non-standard sizing system

Visit Zpacks.com for full backpack specifications

Disclosure: Philip Werner (SectionHiker.com) received a loaner Arc Blast backpack from ZPacks.com for this review. 

Last updated 2018.

SectionHiker is reader-supported. We only make money if you purchase a product through our affiliate links. Help us continue to test and write unsponsored and independent gear reviews, beginner FAQs, and free hiking guides.

11 comments

  1. Hi, Philip,
    I clip the top together before rolling it down. The cross strap holds id and there’s nothing to “catch.”

    • Thanks for that tip! I’m now glad that I didn’t order the side pack clips because this more than passes my criteria for ‘tight & tidy’.

      • Weight recommendations as well as max. I have a zpacks tent as well as bag. Might be nice to include pack as well. Put my base weight in a pretty good range. Thanks

  2. Grandma bought Grandpa one for our 49th anniversary. Grandpa is looking forward to trying it on an AT section hike next month. Grandpa is trying to get his total starting weight for a several day leg down under 24# (11kg). His back doesn’t gripe nearly as much at that weight, although his back is plenty gripey all the time.

  3. I’m an Arc Haul owner and I would like more info on Adjustable torso w/ load lifter straps attached to frame.

    Thank you

  4. Been carrying one for several years. Love the way it packs and can fit a lot depending on season. But after mile 30 or 40 comfort can be an issue for me, especially in the shoulders.

  5. This review looks like it must be a much older model of the arc blast 55. Notably the waist belt is removable and not sewn-in as shown in the photos. Additionally, the sizing is now 55L and some of the “options” are now standard (adjustable torso with load lifters, for example). Finally, the pack is available in either DCF or Robic. The prices are old. If you updated this in January, it almost seems like the original version got re-pushed instead of any updated one.

    Just an FYI

    • Thanks for catching that. I’ve moved it into our vintage gear reviews category and put a note at the top. WordPress doesn’t have a very good mechanism for dating post updates.

Leave a Reply

Your email address will not be published. Required fields are marked *

Solve *